Removing The Chassis Cover/移除上盖/移除上蓋 - Advantech HPC-2040 User Manual

Note! Use caution when installing or operating the components with the chas-
sis open. Be sure to turn off the power, unplug the power cord and
ground yourself by touching the metal chassis before you handle any
components inside the machine.
机箱打开时，请小心安装或操作机箱内部组件。请务必关闭机箱电源并
断开电源线。接触机箱内部组件之前，请先触摸金属机箱接地。
機箱打開時，請小心安裝或操作機箱內部元件。請務必關閉機箱電源並
拔除電源線。接觸機箱內部元件之前，請先觸摸金屬機箱接地。
2.1 Removing the Chassis Cover/移除上盖/移除上蓋
1. Remove two screws on the rear panel to release the top cover from the chassis
移除后窗两颗手旋螺丝
移除後窗兩顆手旋螺絲
2. Slide the cover back then lift up the cover from the chassis.
将上盖向后窗推动后并向上抬起
將上蓋向後窗推動後並向上抬起
Figure 2.1 Removing the Side Cover/ 移除侧盖 / 移除側蓋
HPC-2040 User Manual / 用户手册 8