Intermittent Pilot Electronic System Wiring Diagram - Empire Comfort Systems MILLIVOLT DVCP36SP30N-1 Installation Instructions And Owner's Manual

Direct vent zero clearance gas fireplace heater
Hide thumbs Also See for MILLIVOLT DVCP36SP30N-1:
Table of Contents

Advertisement

INTERMITTENT PILOT ELECTRONIC SYSTEM WIRING DIAGRAM

If any of the original wire as supplied with this fireplace must
be replaced, it must be replaced with equivalent gauge and
temperature rated wire.
Electrical Grounding Instructions
This module is equipped with a three-prong (grounding)
plug for your protection against shock hazard and should
be plugged directly into a properly grounded three-prong
receptacle. Do not cut or remove the grounding prong from this
plug.
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dangerous
operation.
36092-10-0619
WARNING
CAUTION
Do not operate the fireplace with glass panel removed,
cracked or broken. Replacement of the panel should be
done by a licensed or qualified service person.
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, personal injury
or loss of life. Installation and service must be performed
by a qualified installer, service agency or the gas supplier.
Verify proper operation after servicing.
CAUTION
WARNING
Page 63

Advertisement

Table of Contents
loading

Table of Contents