Intermittent Control System Wiring Diagram - Empire Comfort Systems VFP24FP30 Installation Instructions And Owner's Manual

INTERMITTENT CONTROL SYSTEM WIRING DIAGRAM

If any of the original wire as supplied with this unit must be replaced, it must be replaced with equivalent gauge and temperature rated wire.
This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently
located, manufactured (mobile) home where not prohibited by local codes. This appliance is not convertible for use with other gases.
Do not operate the appliance with panel(s) removed, cracked or broken. Replacement of the panel(s) should be done by a
licensed or qualified service person.
Improper installation, adjustment, alteration, service or maintenance can cause property damage, personal injury or loss of
life. Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Page 28
CAUTION
WARNING
30411-16-0919