Empire Comfort Systems MILLIVOLT DVCP36SP30N-1 Installation Instructions And Owner's Manual page 69

Direct vent zero clearance gas fireplace heater
Hide thumbs Also See for MILLIVOLT DVCP36SP30N-1:
Table of Contents

Advertisement

MAINTENANCE AND SERVICE (CONT'D)
Glass Removal and Replacement
1.
Remove bottom access panel.
2.
Release two glass frame clamps at bottom of firebox.
3.
Remove glass frame and screen frames as a unit.
4.
Place glass and screen frames onto firebox.
5.
Attach two glass frame clamps at bottom of firebox.
6.
Replace access panel.
Do not operate fireplace with the glass front removed, cracked,
or broken. Replacement of the glass should be done by a
licensed or qualified service person.
36092-10-0619
WARNING
Figure 76
Separating Screen Frame From Glass Frame
1.
Turn glass and screen frame assembly upside down and rest
the glass frame on a block of wood, step, or similar object.
2.
Push downwards on screen frame to release the tabs from
the glass frame.
Note: When reattaching screen frame to glass frame, orient the
screen frame so that the tabs with notches are on the top
side of the glass frame.
GLASS
FRAME
SCREEN
FRAME
TABS WITH NOTCHES
GO ON TOP SIDE
Figure 77
Page 69

Advertisement

Table of Contents
loading

Table of Contents