Synology RX1222sas at a Glance
Front
Rear
No.
Article Name
1
POWER Indicator
2
ALERT Indicator
3
Beep Off Button
4
Drive Status Indicator
5
Drive Tray
6
Rail Kit Release Tab
1
RX1222sas automatically powers on when the power cord is plugged into the power source. For more information, please see "Connect with
Synology NAS".
2
For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.
4 Chapter 1: Before You Start
Location
Displays the power status.
Displays warnings regarding fan or temperature. For more
information, see "LED Indicator Table".
Press to deactivate the beep that sounds when a malfunction
occurs.
Front
Displays the status of drive. For more information, see "LED
Indicator Table".
Install drives (hard disk drives or solid state drives) here.
Push in and hold to release your RX1222sas from the rail kit
2
lock.
Description
1