AGFA DR Full Leg Full Spine User Manual page 70

70 | DR Full Leg Full Spine | Problem solving
0179E EN 20210708 1527
6. To display the collimation area, select the icon below.
To draw a polygonal collimation area:
1. Select an image in the Image Overview pane.
2. In the Editing window, from the first drop-down list
in the Image Processing tool section, select the icon
below.
3. Click to define the starting point.
4. Move the pointer and click to define each corner.
5. Click the starting point to close the polygon.
6. To display the collimation area, select the icon below.