Basic Features - AGFA DR Full Leg Full Spine User Manual

26 | DR Full Leg Full Spine | Getting started

Basic Features

• Automatic workflow. To create a DR Full Leg Full Spine image, a set of
partial images is acquired in a completely automated workflow, using the
automatic positioning of the X-Ray system.
• Automatic stitching. The partial images are automatically stitched to
create the DR Full Leg Full Spine image. Stitching is applied based on grid
markers in the stitching grid of the DX Full Leg Full Spine Stand or the DX
FLFS Horizontal Overlay and a correction is applied based on the
alignment of the anatomical information in the image.
• Calibration of distance measurements on NX. For accurate length
measurements, the DR Full Leg Full Spine image is calibrated based on the
Estimated Radiographic Magnification Factor.
0179E EN 20210708 1527