Table of Contents
Advertisement
58 | DR Full Leg Full Spine | Getting started
Manually adjusting a DR Full Leg Full Spine image
Topics:
•
To rotate all partial images
•
To stitch a set of partial images
•
To align the partial images based on their projection on the stitching
grid
•
To align the partial images based on the analysis of the anatomical
information in the image
•
To manually align two partial images
•
To turn the black borders or cropping on or off
•
To save the stitched image
To rotate all partial images
Rotate all partial images
• Click the following button to rotate 90° clockwise:
• Click the following button to rotate 90° counterclockwise:
To stitch a set of partial images
To stitch a set of partial images:
1. In NX, go to the Examination window.
2. In the Image Overview pane, select the thumbnail of one of the partial
images.
3. Click Stitch Images.
The Stitching pane is displayed.
Stitching is applied based on grid markers in the stitching grid and a
correction is applied based on the alignment of the anatomical
information in the image.
The area of the image where two partial images are stitched together is
indicated by the stitching tools displayed on the right side of the image. In
this area, the two partial images slightly overlap. If the anatomical
0179E EN 20210708 1527
Figure 21: Rotate clockwise
Figure 22: Rotate counterclockwise
Advertisement
Table of Contents
