Perform A Quality Control - AGFA DR Full Leg Full Spine User Manual

38 | DR Full Leg Full Spine | Getting started

Perform a quality control

In the operator room at the NX workstation, the DR Full Leg Full Spine image
is displayed in the Stitching pane.
Figure 12: Stitching pane
Stitching is applied based on grid markers in the stitching grid and a
correction is applied based on the alignment of the anatomical information in
the image.
The stitching parameters are displayed on the right side of the image:
Table 4: Stitching parameters
Button Parameter
0.0
-0.1
0179E EN 20210708 1527
Vertical correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
Horizontal correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
Indication that automatic stitching has been performed based on
the alignment of the anatomical information in the image.