AGFA DR Full Leg Full Spine User Manual page 59

structures in the overlapping area are not aligned, stitching can be
adjusted manually.
To align the partial images based on their projection on the stitching
grid
To align the partial images based on their projection on the stitching grid:
Click Grid.
Figure 23: Stitch mode: grid
The anatomical structure in the partial images may not be aligned, due to
patient movement during the examination.
The values of the horizontal and vertical correction are set to zero. Next to
the stitching areas the following label is displayed.
0.0
-0.1
Figure 24: Stitching tools: align partial images
To align the partial images based on the analysis of the anatomical
information in the image
To align the partial images based on the analysis of the anatomical infor-
mation in the image:
Click Anatomic.
Figure 25: Stitch mode: anatomic
The anatomical structures in the overlapping areas are aligned by
automatically shifting the partial images in vertical and horizontal
direction.
DR Full Leg Full Spine | Getting started | 59
0179E EN 20210708 1527