Table of Contents
Advertisement
3.2 Replacement Methods
3.2.1 Cable
If the cable is replaced without turning the power OFF, the normal unit or peripheral devices could be
damaged, and risks could be imposed.
Disconnect each cable with the following procedures.
a) For the following type of connector, press the tabs with a thumb and forefinger in the direction of the
arrow, and pull the connector off.
(2) Pull
CAUTION
Downloaded from
ManualsNet.com
3. DAILY MAINTENANCE AND PERIODIC INSPECTION AND MAINTENANCE
(1) Press
(2) Pull
Do not connect or disconnect the connection cables between each unit while the power is
ON.
Do not connect the cable by pulling on the cable wire.
search engine
3.2 Replacement Methods
(2) Pull
(1) Press
II-11
(1) Press
Advertisement
Table of Contents
