Table of Contents
Advertisement
２ ２ ２ ２ ２ . . . . . Start Recording via Base Unit
１.Set the Recording Interval by pressing the [INTERVAL] button. Each time you
press, it will take you to the next possible interval. A pause of 3 seconds will
set the interval and return you to the main display.
《10 seconds》
２.Start Recording by pressing down on the [REC/STOP] button for more than 2
seconds; the REC lamp will appear lit on the display.
●
With some computer models, even though you have set a programmed start and
the unit is in waiting mode, by pressing [REC/STOP] recording will begin immedi-
ately.
While recording, Recording will stop if you hold down the [REC/STOP] button for
●
more than 2 seconds.
If you want to make any changes to the settings other than recording interval
●
please see [Start Recording Via Computer]
WARNING
If you press on the [REC/STOP] button when the REC lamp is not lit, the next
recording will begin and any former data will be automatically deleted.
When you want to stop a recording session press the [REC/STOP] button for 2
●
or more seconds.
When you want to check the recording interval while recording press the [IN-
●
TERVAL] button and it will appear on the display. YOU CAN NOT MAKE CHANGES
WHILE RECORDING.
《10 minutes》
Downloading Recorded Data
１ １ １ １ １ . . . . . Make sure Communication Cable is connected to the Com-
puter.
２ ２ ２ ２ ２ . . . . . Make sure Communication Cable is connected to the Thermo
Recorder.
For instructions on these steps, see page 17.
●
３． Begin Downloading Data.
３．
３．
３．
３．
①From the [Communication] menu select [Download Recorded Data...]
②The [Download Recorded Data] screen will appear.
③Start downloading by clicking [Download]
④After downloading has been completed click the [Exit] button and the corre-
sponding graph will be displayed.
③ ③ ③ ③ ③
④ ④ ④ ④ ④
20
Advertisement
Table of Contents
