Starting Recording From Main Unit Button; Start Recording; Stop Recording - T&D TR-73U Manual

Starting Recording from Main Unit Button

By pressing the <REC/STOP> button on the main unit you can start a recording session
immediately.
*If you wish to make changes to the device name, channel name, recording mode or to any other
recording conditions, you must make those settings by connecting the device to your computer.

Start Recording

Press in the <REC/STOP> button on the front of the unit until the [REC] mark appears
in the display. When displayed, recording has begun.
NOTE:
- By starting a new recording session, all data currently saved in the unit will be erased.
- Even if the unit is waiting for a programmed recording to start via the provided software, by pressing
the <REC/ STOP> button until the [REC] mark appears, you can start a new recording session
immediately.

Stop Recording

You can stop a recording session by pressing the <REC/STOP> button until the [REC]
mark disappears from the display. When it has disappeared, recording has stopped.
21
[REC] mark
lights up
[REC] mark
disappears
<REC / STOP>
button