Saving Data; Creating Text File; Replacing The Battery - T&D TR-81 Instruction Manual

Saving Data

From the [File] Menu select either [Save All Data As...] or [Save Partial Data As...]
◆
Type in the desired name
in the [Untitled.TRH] space
under [File name].
Make sure to change [File Type] when necessary.

Creating Text File

From the [File] Menu select either [Output All Data in Text File...] or [Output Partial
◆
Data in Text File...]
Type in the desired name in
the [Untitled .TXT] space
under [File name].
Type of file is [. TXT]
Make sure to change [File Type] when necessary.
・Text File (Comma)[,] ・Text File (Tab) ・Text File (Semi colon)[;]
・Text File (Space) ・All Files [*.*]
Codes such as comma, tab, semicolon and space are used to divide cells when loading
● ● ● ● ●
text file through spreadsheet software such as Lotus 1,2,3 and Excel.
※ ※ ※ ※ ※ Text File can not be loaded into Hi for Windows.
Specify location for saving
※ Sample Screen
Specify location for saving
※ Sample Screen

Replacing the Battery

Time to change the battery
◆Once the BAT lamp appears on the display make sure to change the battery as soon as
possible. If you change the battery before the BAT lamp begins to blink, recording will
continue uninterrupted and without any loss of data.
◆ If the batteries go completely dead, all recorded data and recording settings will be lost,
so please be attentive to the BAT lamp.
◆ The following chart can give you a general idea as to battery life.
Time before BAT lamp (warning) appears.
The main unit can remain in working condition for about 2 minutes without a battery.
●
Battery life depends on many conditions including the recording environment, the recording inter-
●
val, the amount of communication, the surrounding temperature, and others. This explanation is
based on using a new battery and in no way should be taken as a guarantee of battery life.
After changing the battery
◆ If you changed the battery when the BAT lamp was on.
Change battery
◆ If you changed the battery when the BAT lamp was blinking.
Change battery
WARNING
If the BAT lamp is blinking make sure to download all data as soon as possible. If you
press the [REC/STOP] button on the main unit a new recording session will begin
and all previously recorded data will be automatically deleted.
Recording Int. of more than
Recording Int. of 1 second
2 sec's.
Maximum 8 months Maximum 5 months
Returns to same condition as before lamp
appeared. Recording continues without
trouble.
The power automatically goes off. Make
sure to turn back on.
22