Connecting Main Unit To Computer - T&D RTR-71 User Manual

3. Connecting Main Unit to Computer

Connect the Thermo Recorder main unit to the computer with the communication
cable provided. Each unit's registration or deletion of registration should be
done one at a time by connecting it to the computer with the communication
cable.
Please connect the communication cable to the serial port [RS-232C] with a
●
mark such as shown below.
If you connect the cable to a port other than the serial port, communication will
●
not occur properly.
Make sure that the cable is securely connected.
●
About the Control Program
The [Control Program] will be opened automatically upon Start up and an
icon will appear in the task tray. By clicking on the [Control Program] icon in
the task tray you can open the [Start up Program] as well as the [Graph Tools
Program].
15