Starting Recording - T&D TR-7xU Series User Manual

TR-71U/72U : Starting Recording
◆ Connect a TR-71U/72U unit to your computer so that
communication can occur.
※ Please see p 9 -13 for more information about how to connect.
The first time you connect it is necessary to install the USB device driver.
For information about how to install the device driver please see the
Hardware User's Manual.
◆ Setting the Recording Conditions.
１.
In the Main Window, click on the [TR-71U/72U] icon.
２.
Click on the icon of the data logger you wish to make settings for.
３.
Click the [Start Recording] tab, and make the necessary settings.
Icon
Recording Start Date/Time <Selections:Programmed Start/
●
Programmed Start: recording will start on the specified date and time.
Immediate Start: recording will start immediately upon completion of
Recording Interval <Selections:1,2,5,10,15,20,30 seconds and 1,2,5,10,
●
Click on
▼
[Start Recording] tab
settings.
and select the desired recording interval from the drop-down list.
[Start Recording]
[Stop Recording] button
[Receive Settings] button
Immediate Start>
15,20,30, 60 minutes>
www.MicroDAQ.com
button
(603) 746-5524
12