Other Features - DCU Tecnologic Elegance 34157015 User Manual

ENG
the gap of the watch case, when the temperature drops and will
condense into liquid phase water droplets, easy to cause the
watch's internal circuit short circuit, damage the watch's circuit
board, and then damage the watch.
Why is my smartwatch not receiving notifications?
1. Confirm that you have given all the necessary permissions to
the DaFit APP to read the notifications and that the APP is
running in the background.
2. Confirm that the messages are displayed normally in the
notification bar of the phone. Watch message notifications are
done by reading the message from the phone's notification bar;
If there is no message in the notification bar of the phone, the
watch will not receive it.
3. Confirm that you have enabled notifications in the DaFit watch
APP settings.

OTHER FEATURES:

Other smartwatch functions include stopwatch, alarm, timer,
brightness adjustment, vibration on/off, do not disturb mode, movie
mode, factory reset, power off and smartwatch information.
CHANGE THE MAIN SCREEN STYLE:
Hold down the main screen, swipe from left to right to change the
dial, click confirm.
You can find more designs available in the DaFit APP.
PAY SPECIAL ATTENTION TO THESE TIPS:
1. Avoid the watch being subjected to strong impacts, extreme
heat and/or sun exposure.
2. Do not disassemble, repair or modify the watch yourself.
3. This device uses 5V 500mA for charging. It is strictly forbidden
to use a power supply with a load greater than 5V.
4. The operating environment of this device is 0 ° ~ 45 °. Keep it
away from extreme heat sources.
5. When the watch is wet, wipe it dry with a soft cloth before
charging, otherwise it will corrode the charging contacts and
cause charging failure.
6. Do not touch chemicals such as gasoline, cleaning solvents,
propanol, alcohol, or insect repellent.
7. Do not use this device in high voltage and high magnetism
environment.
8. If you have sensitive skin or wear the watch too tight, it may
feel uncomfortable.
21