Selecting Or Adjusting A Camera; Best Practices - Polycom RealPresence Group Series Quick Tips

4 On the Manage Favorites page, click Create New Favorite, and then complete the fields and click
Save.

Selecting or Adjusting a Camera

 While in a call, select
menu disappears and a message displays, telling you which camera you are controlling.
 To switch between Your Cameras and Their Cameras without accessing the menu, press Select
on the remote control while in a call.
 To pan or tilt the selected camera, press the left, right, up, and down navigation buttons on the
remote control.
 To control the cameras without accessing the menu, press

Best Practices

 Make sure you know the name or number of the site you want to call.
 Connect and test any additional equipment before the meeting.
 Avoid wearing bright colors, all-light or all-dark clothing, or busy patterns. Light pastels and muted
colors look the best on the screen.
 Adjust your camera so that the far site can see you. Fill the screen with people rather than with the
table, chairs, walls, lights, or floor.
 Adjust your microphone so that the far site can hear you. Mute the microphone before moving it so
that the far site doesn't hear you moving it.
 Make sure that you can see and hear the far-site participants.
 Introduce all participants when the meeting starts.
 Speak in your normal voice without shouting. Use natural gestures when you speak.
 Don't tap on the microphone or rustle papers near the microphone. In a multipoint call, mute your
microphone when you are not speaking.
> Cameras and select either Your Cameras or Their Cameras. The
or .