Dräger Oxipac 2000 Instructions For Use Manual page 6

Bedienkonzept
weitere Anzeigen:
PROBE = Sensor-Fehler
15
BATT = Akku verbraucht
16
= Alarmton abgeschaltet
17
Akustische Hinweise, Warnungen
und Alarme
Pulston Tonhöhe abhängig von
(Hinweis) SpO -Wert
2
Lautstärke einstellbar,
siehe Seite 16.
Sensorfehler Doppelton, gleiche
(Warnung) Tonhöhe, jede
Sekunde.
Akku leer Fünf kurze Töne, alle
(Warnung) 30 Sekunden
Nicht abschaltbar.
Puls/SpO Doppelton in zwei
2
(Alarm) Tonhöhen, jede
Sekunde.
Lautstärke einstellbar,
siehe Seite 16.
Abschaltbar, siehe
Seite 15.
This "Instructions for Use" manual is published for public use and is only meant for your information.
We do not guarantee the accuracy of these instructions with respect to your specific device type or status.
Only the "Instructions for Use" manual delivered together with a device is officially published for the use of that specific device.
6
94
SpO
2
102
ª bpm
15 PROBE
BATT
17
16
ª
P1...
Oxipac 2000
D
1 s
30 s
1 s
How to Use Oxipac 2000
Other displays:
PROBE = sensor error
15
BATT = rechargeable battery low
16
= alarm sound switched off
17
Audible messages, warnings and
alarms
Pulse tone Pitch of pulse tone
(advisory) depends on SpO
value
Tone volume
adjustable, see
page 16.
Sensor error Double beep, on one
(warning) note, at one-second
intervals.
Battery Five short beeps,
discharged every 30 seconds.
(warning) Can not be switched
off.
Pulse/SpO Double beep on
2
(alarm) two-notes, at one-
second intervals.
Sound volume can be
adjusted, see page 16.
Can be switched off,
see page 15.
2