Ballard Designs Trucco SF071 Quick Start Manual

Sideboard

PRODUCT NAME: Trucco Sideboard

ITEM NUMBER: SF071

ASSEMBLED DIMENSIONS : 34"H x 42.5"W x 16"D

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 9-17-2020

Prevent accidentally discarding small parts or

hardware. Retain all carton contents until assembly

and installation are complete.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN INDIA

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the Trucco SF071 and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Trucco Sideboard ITEM NUMBER: SF071 ASSEMBLED DIMENSIONS : 34”H x 42.5”W x 16”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE.
Page 2 Assemble in location for intended use. REQUIRED TOOLS: Ltr. Qty. Hardware Included Phillips Screwdriver, Pencil, Drill with a Drill Bit Wall Anchoring Anti-tip Kit -Two person assembly suggested. See Page 3 Remove all parts, hardware and protective packaging from carton WARNING and carefully arrange on a clean, level, padded surface.
Page 3 Screws (Wall Stud) Cable Wall Bracket Toggle Bolts (No Wall Stud) See Page 4 for Details If possible, center Wall Bracket (F) on a Wall Stud in line with pre-installed Bracket on back of Sideboard. Use Screws (D) to anchor it into Wall Stud. If it is not possible to align with a Wall Stud (open drywall) use Toggle Bolts (G) to attach Wall Bracket.
Page 4 Toggle Bolts are designed for installation location(s) where no Wall Stud is present. Please read instructions carefully and completely to insure Furniture is securely anchored to wall, preventing a dangerous tip-over accident. TOOLS REQUIRED: Screwdriver, Pencil, Toggle Bolts (G) Drill and Drill Bit INSTALLING TOGGLE BOLTS Drywall Drill Bit...