Table of Contents
Related Manuals for Ballard Designs Bohler SF044
Summary of Contents for Ballard Designs Bohler SF044
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Bohler Sideboard ITEM NUMBER: SF044 DIMENSIONS OF ITEM ASSEMBLED: 36” H x 65” W x 15 3/4” D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 1/18/18 Page 1 of 4...
- Page 2 Hardware (A - C) Shelf (E) Shelf (D) TOOLS NEEDED: Ltr. Qty. Hardware Included -Requires a screwdriver -Power drill suggested -Two person assembly Shelf Supports suggested NOTE: When unpacking, lay Anti-Tip Kits the parts on a padded surface such as the packaging provided. Be sure to locate all hardware Wood Plugs before throwing away any...
- Page 3 NOTE: Assemble in the desired location for use. STEP 1: Place the Shelf Supports (A) at the desired shelf heights and lay the Shelves (D, E) on the Shelf Supports. (D,E) STEP 2: If the Sideboard is uneven, adjust the levelers inside the bottom corners of the Sideboard using a flat head screwdriver.
- Page 4 Anti-Tip Installation: Part B Ltr. Qty. Hardware Included Small Screws Large Screws Brackets Retention Belts STEP 4: Attach a Bracket (H) to the back of the Sideboard with a Small Screw (F) through the smaller hole. Then screw one of the remaining Brackets to the wall stud with a Large Screw (G), 2 inches below the Bracket attached to the Sideboard.
Need help?
Do you have a question about the Bohler SF044 and is the answer not in the manual?
Questions and answers