Download Print this page
Panduit ATLONA AT-OME-MS42 Installation Manual

Panduit ATLONA AT-OME-MS42 Installation Manual

Omega multi-format 4x2 matrix switcher with hdmi, usb-c, and displayport inputs, plus hdmi and hdbaset outputs
Hide thumbs Also See for ATLONA AT-OME-MS42:

Advertisement

Quick Links

Omega Multi-format 4x2 matrix switcher with HDMI, USB-C,
and DisplayPort inputs, plus HDMI and HDBaseT outputs
AT-OME-MS42
The Atlona AT-OME-MS42 is a 4x2 matrix switcher with HDMI, USB-C, and DisplayPort inputs,
plus HDMI and HDBaseT outputs. Part of the Omega™ Series of integration products for modern
AV communications and collaboration, the OME-MS42 is HDCP 2.2 compliant and features
HDBaseT extension for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and
USB over distances up to 330 feet (100 meters). All inputs and the local HDMI output support
4K HDR and 4K/60 4:4:4 at HDMI data rates up to 18 Gbps. Additionally, 4K downscaling to
1080p @ 60, 30, or 24 Hz is available for the HDMI output when connected to an HD sink. The
integrated USB extension addresses the challenge of connecting between USB devices at
remote locations, and is ideal for software video conferencing and touch or interactive displays.
The OME-MS42 includes USB 2.0 and USB-C interfaces for three host PCs, plus two peripheral
devices such as a camera, microphone, speakerphone, or keyboard and mouse. It is ideal for
video conferencing and many other 4K presentation applications with the OME-EX-RX receiver
and OME-SR21 scaling receiver.
Package Contents
1 x AT-OME-MS42
1 x Captive screw connector, 5-pin
1 x Captive screw connector, 3-pin
1 x USB-C cable
2 x Mounting plate
4 x Mounting screws
4 x Feet w/rubber grips
1 x 24V DC power supply
1 x IEC power cord
1 x Installation Guide
IMPORTANT: Visit https://atlona.com/product/AT-OME-MS42 for the latest firmware
updates and User Manual.
1
Installation Guide
AT-OME-MS42

Advertisement

loading

Summary of Contents for Panduit ATLONA AT-OME-MS42

  • Page 1 DisplayPort inputs, plus HDMI and HDBaseT outputs AT-OME-MS42 The Atlona AT-OME-MS42 is a 4x2 matrix switcher with HDMI, USB-C, and DisplayPort inputs, plus HDMI and HDBaseT outputs. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-MS42 is HDCP 2.2 compliant and features HDBaseT extension for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters).
  • Page 2 Installation Guide AT-OME-MS42 Panel Descriptions AT-OME-MS42 USB-C USB-C HDMI 3 HDMI 3 LINK HDMI 4 HDMI 4 OMEGA MULTI-FOMAT SWITCHER HDMI OUT HDBaseT OUT DISPLAY USB HUB AUDIO OUT RS-232 IP MODE RX TX RESET USB HOST USB-C IN DP IN HDMI IN HDMI OUT HDBaseT OUT...
  • Page 3 Installation Guide AT-OME-MS42 RS-232 A 3-pin captive screw connector has been included for RS-232. Pin out will be determined by the RS-232 cable and connect as RX (receive), TX (transmit) and (Ground). Audio Connect to an audio DSP, amplifier, or other audio distribution devices.
  • Page 4: Mounting Instructions

    Installation Guide AT-OME-MS42 Mounting Instructions The AT-OME-MS42 can be mounted under a desk, lectern, or other flat surface. Turn the unit upside down on a flat surface. Position the included mounting plates over the pre-drilled holes on the bottom of the enclosure.
  • Page 5: Installation

    Installation Guide AT-OME-MS42 Cable Recommendation Guidelines Refer to the tables below for recommended cabling when using Altona products with HDBaseT. The green bars indicate the signal quality when using each type of cable. Higher-quality signals are represented by more bars. Core Shielding CAT5e...
  • Page 6: Accessing The Webgui

    Installation Guide AT-OME-MS42 Static If no DHCP server is available, or a static IP is required, the OME-MS42 can be set to static IP mode using the IP mode button. • Press and hold the IP MODE button for 5 seconds to switch to static IP mode, the LED will blink 2 times when it goes into Static IP mode.
  • Page 7 Installation Guide AT-OME-MS42 Notes...
  • Page 8: Warranty

    Installation Guide AT-OME-MS42 Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/ome-ms42/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. ®...