Chapter 2
Introduction
This chapter describes how to set up the Digi Connect
product and install the customization kit.
Quick Start Overview
1. Physically connect the hardware.
2. Install the software and tools.
3. Locate the product on the network and configure network
4. Access the product from a web browser.
5. Get familiar with the product and customization kit features.
Quick Start Procedure
1. Connect the Ethernet cable to the product.
2. Connect the power to the Digi Connect product.
Chapter 2 Quick Start Setup
settings.
The following figure shows a hardware set up for Connect ME.
Q u i c k S t a r t S e t u p
9