Periodic Inspection - Haulotte H12 SX Maintenance Book

H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL -
H18 SX - HS5388 RT - H18 SXL
D
- Inspection and maintenance schedule

4 - Periodic inspection

The Periodic inspection is a thorough inspection of the operation and safety features of the machine. This must
take place prior to the sale or resale of the machine and every 1 year. Local regulations may have specific
requirements on frequency, and content of inspections.
This intervention must take place after :
• Extensive dismantling and reassembly
• Repairs involving the machine's essential components
• Any accident causing stress to the machine
This inspection is the responsibility of the owner, and must be conducted by a qualified technician.
Under no circumstances may this inspection replace the control required by local regulations.
Use the detailed program below.
Periodic
Chassis assembly : Wheel, reducer, steering, wheel pivot
Check state of tires/tyres and inflations
Engine
Check that there are no leaks from the
engine's components (engine, hose, radiator)
Check the condition of the battery
Check for visible damage and broken welds
on the exhaust system
Check the operation of the lock on the engine
casing
Hydraulic : oils, filters and hoses
Check the hoses, blocks and pumps, fittings,
cylinders and the tank for the absence of
leaks, deformations and damage
Platform
Test the automatic closure and locking of
access basket
Check that the harness anchor points are not
cracked or damaged
Check the quick ties and the good location of
the guardrail
4001015340
Page or
associated
procedure
E 12.18
Comments
USA / GB 45