H12 SX - HS3388 RT - H12 SXL - HS3388 RT XL - H15 SX - HS4388 RT - H15 SXL -
H18 SX - HS5388 RT - H18 SXL
D
- Inspection and maintenance schedule
Inspection and maintenance schedule
1 - Inspection program
The machine must be inspected at regular intervals in accordance with the requirements set out in the country of
use and at least once a year. The purpose of the inspection is to detect any defect which could lead to an accident
during routine use of the machine.
Inspections and maintenance must be carried out by a qualified company or person chosen by the owner of the
machine.
The results of these visits must be recorded in a safety register created by the owner. This register as well as the
list of competent repair persons must made available to the work inspector, government inspector and company
safety committee at any time.
Frequency
Person-in-charge
Before each hire
Owner
Before each use or each
Operator
change of user
At intervals
recommended by
Owner
HAULOTTE®
Before sale
Owner
Annually ( 1 year) (*)
Owner
After 10 years then
Owner
every 5 years
(*) Or according to local regulations.
4001015340
Stakeholder
On-site technician
Operator
On-site technician, qualified
HAULOTTE Services®
technician
On-site technician, qualified
HAULOTTE Services®
technician
On-site technician, qualified
HAULOTTE Services®
technician
Qualified technician
HAULOTTE Services®
E 12.18
Type
Daily inspection
Operator's manual
Daily inspection
Operator's manual
Preventive maintenance Maintenance Book
Periodic inspection
Maintenance Book
Periodic inspection
Maintenance Book
Major inspection
Maintenance Book
USA / GB
Documentation
39