Racelogic Performance Box Touch V2 Quick Start Manual page 16

To save your chosen value, press the Confirm button at the bottom right of the screen. Press the Cancel button at the
bottom left of the screen to return to the Settings screen without saving. The unit will remember the value after each
power cycle.
Note: You can enter speed with up to 1 decimal place.
Reset
Selecting the Reset Button
you press the Reset button, the LEDs will briefly flash green twice.
Logging
Performance Box Touch logs data via an SD card inserted into the SD Card Slot on the left-hand side of the unit.
Depending on the Logging Strategy you have selected in the
or only when it detects movement.
You can manually override the configured logging strategy by tapping on the SD Card Icon when it is
green to start or stop the logging.
The Record Icon will show when the unit is logging data to the SD card.
Target Speed Keypad Example
on the bottom right of the screen will reset all results shown on the current screen. When
General Settings, the unit will either log continuously
16