VTech IS8151 Quick Start Manual page 42

before proceeding.
2. While you press and hold FIND
HS, plug the telephone base
power adapter back to the power
outlet.
3. After about 20 seconds, when
the HOME light starts flashing,
release FIND HS and then press
it again within two seconds. You
hear a confirmation tone. The
HOME light turns off and all
handsets display To register HS...
see manual... alternately. Allow up
to one minute for the process to
complete.
If the phone fails to enter this mode,
repeat all the steps mentioned above.
The telephone base will be powered
up as normal if you fail to press FIND
HS within two seconds in Step 3.
To deactivate the CEC battery
charging testing mode:
1. Unplug the telephone base
power adapter from the power
outlet, and then plug it back
in. Then the telephone base is
powered up as normal.
2. Put the handsets on the telephone
base cradle to begin registration.
3. The telephone base shows
Registering... Please wait,
and the handset then shows
Registering... If the registration
is successful, the handset screen
displays Registered and beeps.
The handset is registered with the
telephone base.
Limited Warranty
What does this limited
warranty cover?
The manufacturer of this
VTech Product warrants to
the holder of a valid proof
of purchase ("Consumer" or
"you") that the Product and all
accessories provided in the
sales package ("Product") are
free from defects in material
and workmanship, pursuant
to the following terms and
conditions, when installed
and used normally and in
accordance with the Product
operating instructions. This
limited warranty extends only
to the Consumer for Products
purchased and used in the
United States of America and
Canada.
What will VTech do if the
Product is not free from
defects in materials and
workmanship during the
limited warranty period
42