Advertisement
Table of Contents
Do not throw away these instructions!
Read and understand these instructions before
using this device. For any questions, please call
(404) 344-0000.
Swing Gate Hinge Assembly
WARNING: This product can expose you to chemicals including Nickel, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Adjustable Swing Gate
Installation and Use
Part #70910
The Adjustable Swing Gate can be
set up to fit 70" to 85" gate widths.
Hinge Gate End Section
Center Adjustable
Swing Gate Section
404-344-0000 • www.tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
sales@tiedown.com
Wheeled Gate End Section
Instruction #08377
E1834; Rev. 3/29/21
Advertisement
Table of Contents
Related Manuals for TIE DOWN 70910
Summary of Contents for TIE DOWN 70910
- Page 1 Adjustable Swing Gate Installation and Use Part #70910 Do not throw away these instructions! Read and understand these instructions before using this device. For any questions, please call (404) 344-0000. The Adjustable Swing Gate can be set up to fit 70” to 85” gate widths.
- Page 2 Swing Hinge by placing over the inside of the guardrail. Secure the u-bolt with the washers and nylock nuts. Do not fully tighten the nylock nuts. Page 2 of 4 TIE DOWN Safety Products Division • 800-241-1806 • 404-344-0000 • www.tiedown.com...
- Page 3 Mount the screws using the holes on the inside of the Center Adjustable Section. Tighten the nylock nuts on the Swing Gate Hinge. Page 3 of 4 TIE DOWN Safety Products Division • 800-241-1806 • 404-344-0000 • www.tiedown.com...
- Page 4 Page 4 of 4 Safety Products Division www.tiedown.com 605 Stonehill Drive SW ISO 9001:2015 Certification Atlanta, Georgia 30336 Intellectual property of TIE DOWN Inc. 800-241-1806 • 404-344-0000 ©2020 TIE DOWN, Inc. Instruction #08348 (E1834 Rev. 3/29/21)
Need help?
Do you have a question about the 70910 and is the answer not in the manual?
Questions and answers