Advertisement
Read and understand these instructions before using this product.
Keep these instructions for future reference.
WARNING: This product can expose you to chemicals including Nickel, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
WARNING: This product can expose you to chemicals including Nickel, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
WARNING: This product can expose you to
chemicals including Nickel, which is known to
the State of California to cause cancer. For more
information go to: www.P65Warnings.ca.gov
WARNING: This product can expose you
to chemicals including Nickel, which is
known to the State of California to
cause cancer. For more information
go to: www.P65Warnings.ca.gov
WARNING: This product can expose you
Slab Gripper
Installation and Use
Model #14367
The Tie Down Slab Gripper is the perfect solution for installing
guardrail systems on concrete decking. This OSHA compliant
guardrail system includes a quick adjustment handle which
guarantees the system's integrity.
This guardrail system includes a quick adjustment handle and
a backup safety pin, which guarantees the system's integrity.
These additional features allow compliance with all applicable
OSHA standards.
The Tie Down Slab Gripper installs easily and quickly and
adjusts to fit concrete slabs up to 27" thick. It is compatible
with 2" x 4" boards, as well as cable or snap-on metal railings.
The Slab Gripper can be adjusted to fit decking that does not
allow for slab attachment with the use of standard Hilti type
concrete anchor bolts. The Slab Gripper is resistant to corrosion
and damage because of the durable coating.
Features:
Ideal for concrete decking operations
Fast and easy setup
Adjusts up to a 27" slab
Meets OSHA standards
12"
12"
404-344-0000 • www.tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
Instruction #08409 (E1899 - Rev. 2/16/22)
sales@tiedown.com
Online
Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TIE DOWN 14367
Summary of Contents for TIE DOWN 14367
- Page 1 Read and understand these instructions before using this product. Keep these instructions for future reference. The Tie Down Slab Gripper is the perfect solution for installing guardrail systems on concrete decking. This OSHA compliant guardrail system includes a quick adjustment handle which guarantees the system’s integrity.
- Page 2 Plan and implement a complete Fall Protection Plan prior to use. The Slab Gripper ONLY installs onto concrete or compatible pan decking. The Tie Down Slab Gripper MUST install evenly against the substrate and must allow guardrail posts to be positioned perpendicular to the working surface. Concrete substrate MUST be deemed compatible with the Tie Down Slab Gripper by a Competent Person.
- Page 3 Nails must pass through the guardrail rung and Nail Hole both 2x4’s. Install toeboards - nail through the guardrail rung. Nails must pass through the guardrail rung and Toe Board 2x4. Nail Hole TIE DOWN Safety Products Division 800-241-1806 • 404-344-0000 • www.tiedown.com E1821, Rev. 2/16/22...
- Page 4 Add a zip tie at the bottom to secure the base of the panel. Safety Products Division 605 Stonehill Drive SW, Atlanta, Georgia 30336 800-241-1806 • 404-344-0000 • www.tiedown.com ISO 9001:2015 Certification Intellectual property of TIE DOWN Inc. ©2018 TIE DOWN, Inc. Instruction #08409 (E1899 Rev. 2/16/22)
Need help?
Do you have a question about the 14367 and is the answer not in the manual?
Questions and answers