Advertisement
Read and understand these instructions before using this product.
Keep these instructions for future reference.
WARNING: This product can expose you to chemicals including Nickel, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
WARNING: This product can expose you to chemicals including Nickel, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
WARNING: This product can expose you to
chemicals including Nickel, which is known to
the State of California to cause cancer. For more
information go to: www.P65Warnings.ca.gov
WARNING: This product can expose you
to chemicals including Nickel, which is
known to the State of California to
Locking Pin
cause cancer. For more information
go to: www.P65Warnings.ca.gov
WARNING: This product can expose you
to chemicals including Nickel, which is
known to the State of California to
Slab Gripper
Installation and Use
Part #70818
The Tie Down Slab Gripper is the perfect solution for installing guardrail
systems on concrete decking.
This guardrail system includes a quick adjustment handle and a backup
safety pin, which guarantees the system's integrity. These additional
features allow compliance with all applicable OSHA standards.
The Tie Down Slab Gripper installs easily and quickly and adjusts to fit
concrete slabs up to 24" thick. It is compatible with 2x4" boards, as
well as cable or snap-on metal railings. The Slab Gripper is resistant to
corrosion and damage because of the durable coating.
Features:
Ideal for concrete decking operations
Backup safety pin prevents separating
Fast and easy setup
Adjusts up to a 24" slab
Meets OSHA standards
Specifications:
Length: 3-3/4'
Material: Powder coated steel & galvanized steel
Standards: OSHA 1910 & OSHA 1926 Subpart M
Color: Yellow or Galvanized
404-344-0000 • www.tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
0"
Instruction #08372 (E1821 - Rev. 3/2/21)
sales@tiedown.com
24" Max.
Online
Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TIE DOWN 70818
Summary of Contents for TIE DOWN 70818
- Page 1 These additional features allow compliance with all applicable OSHA standards. The Tie Down Slab Gripper installs easily and quickly and adjusts to fit concrete slabs up to 24” thick. It is compatible with 2x4” boards, as well as cable or snap-on metal railings.
- Page 2 Plan and implement a complete Fall Protection Plan prior to use. The Slab Gripper ONLY installs onto concrete or compatible pan decking. The Tie Down Slab Gripper MUST install evenly against the substrate and must allow guardrail posts to be positioned perpendicular to the working surface. Concrete substrate MUST be deemed compatible with the Tie Down Slab Gripper by a Competent Person.
- Page 3 Guardrails must overlap by a minimum of 12” at each end. 12” 15. Use nails, deemed compatible by a Competent 12” Person, to install all toeboards to Toeboard Plates. 12” Nail Holes Nail Holes TIE DOWN Safety Products Division 800-241-1806 • 404-344-0000 • www.tiedown.com E1821, Rev. 3/2/21...
- Page 4 Maintenance, Cleaning, and Storage If the Slab Gripper fails inspection in any way, immediately remove it from service, and contact Tie Down to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of this product.
Need help?
Do you have a question about the 70818 and is the answer not in the manual?
Questions and answers