HAKO PowerBoss Phoenix 26 User Manual page 25

System Maintenance S (Safety check)
The following maintenance works are to
be performed by an authorized PowerBoss
Service workshop at least once yearly.
To be Performed
Perform maintenance work according to System Maintenance II
Clean drive motor from carbon dust and check carbon brushes for smooth operation and wear and
replace carbon brushes if required
Clean brush motors from carbon dust and check carbon brushes for smooth operation and wear and
replace carbon brushes if required
Test drive and function test
PowerBoss
Interval
Every 500 hours of operation
o
o
o
o
®
Page 25