Table of Contents
Advertisement
Display
Large unbalanced load
spin extended
9.2
Other possible problems
Problem
The programme duration is
significantly longer than in-
dicated.
The washing has not been
spun or has been spun in-
sufficiently.
The appliance vibrates
heavily when spinning.
Possible cause
▪ Large unbalanced load
in the washing drum.
The appliance tries to
improve the distribution
of the wash load. The fi-
nal spin is extended.
Possible cause
▪ Using too much wash-
ing detergent. Lengthen-
ing the rinsing time.
▪ Large unbalanced load
in the washing drum.
▪ Inlet water very cold.
Heating is extended.
▪ The spin speed set is
too low.
▪ Too unbalanced a load
in the washing drum.
The wash items cannot
be more evenly distrib-
uted.
▪ «Steam anti-crease»
was selected and the
appliance was not
standing level.
▪ The transport lock has
not been removed.
▪ The feet of the appli-
ance are not properly
adjusted.
▪ The load could not be
optimally balanced in
the washing drum. This
is not a malfunction.
9 Trouble-shooting
Solution
▸ Wash large and small items
together to reduce the pos-
sibility of unbalanced loads
forming.
Solution
▸ Reduce the amount of
washing detergent used
next time.
▸ Wash large and small items
together to reduce the pos-
sibility of unbalanced loads
forming.
▸ No action is necessary.
▸ Increase the spin speed for
the next wash cycle (see
page 24).
▸ Wash large and small items
together.
▸ Optimize the appliance set-
up according to the installa-
tion instructions.
▸ Remove transport lock (see
page 7).
▸ Optimize the appliance set-
up according to the installa-
tion instructions.
▸ Wash large and small items
together.
39
Advertisement
Table of Contents
