Trouble-Shooting; Error Messages - V-ZUG UnimaticWash V4000 Operating Instructions Manual

9 Trouble-shooting

9 Trouble-shooting
9.1

Error messages

You may be able to trouble-shoot the following malfunctions yourself. If not, note down
the error message in full (message, F and E numbers) and call Customer Services.
Display
A2 Check water outlet
A3 Foreign body trap
clean
A5 Spin stop:
Unbalanced load
A6 Foreign body trap
check
A9 Check water inlet?
36
Possible cause
▪ The foreign body trap is
clogged or the drain
pump is blocked.
▪ The drain hose is bent
or kinked.
▪ The outlet or drain trap
is clogged.
▪ The foreign body trap is
clogged.
▪ The circulation nozzle is
clogged.
▪ Large items are un-
evenly distributed in the
washing drum.
▪ Pillows or similar items
in the wash.
▪ Wash items are tangled. ▸ Separate the wash items.
▪ The foreign body trap is
missing or is not sitting
correctly.
▪ The water tap is turned
off.
▪ The mesh filter in the
water connection is
clogged.
▪ Interruption in the water
supply.
▪ The water pressure is
too low.
Solution
▸ Remove the cause of the
problem.
▸ Acknowledge the error mes-
sage by touching the
ton.
▸ Restart the programme.
▸ Remove the cause of the
problem.
▸ Acknowledge the error mes-
sage by touching the
ton.
▸ Restart the programme.
▸ Wash large and small items
together to reduce the pos-
sibility of unbalanced loads
forming.
▸ Remove the pillows.
▸ Spin the washing again.
▸ Spin the pillows separately.
▸ Fasten duvet covers and pil-
low cases.
▸ Spin the washing again.
▸ Ensure the foreign body trap
is sitting correctly.
▸ Acknowledge the error mes-
sage by touching the
ton.
▸ Restart the programme.
▸ Resolve the cause of the
problem or wait until the wa-
ter supply is restored.
▸ Acknowledge the error mes-
sage by touching the
ton.
▸ Restart the programme.
but-
but-
but-
but-