Table of Contents
Advertisement
Organization
Organization
This document is organized into the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Related Documentation
Your router and the Cisco IOS software running on it contain extensive features and functionality,
which are documented in the following resources:
•
For Cisco IOS software configuration information and support, refer to the modular configuration
and modular command reference publications in the Cisco IOS software configuration
documentation set that corresponds to the software release installed on your Cisco hardware.
Note
maintenance documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
•
For hardware installation and maintenance information on Cisco 7000 series and Cisco 7500
series routers, and the VIP2, refer to the following publications:
— The installation and configuration guide that shipped with your Cisco 7000 series or
— Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (for
vi
PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration
Title
Overview
Preparing for Installation
VIP2 and the PA-FE Port Adapters
Cisco 7200 Series and the PA-FE
Port Adapters
Cisco uBR7200 Series and the
PA-FE Port Adapters
Cisco 7100 Series and the PA-FE-TX
and PA-FE-FX
Installing PA-FE Port Adapter
Interface Cables
Configuring PA-FE Port Adapter
Interfaces
You can access Cisco IOS software configuration and hardware installation and
Cisco 7500 series router
VIP2 users only)
Description
Provides information about the PA-FE-TX and
PA-FE-FX 100BaseT port adapters, illustrates
their location in the supported hardware
platforms, and describes their LED displays,
cables, and receptacles
Provides information about safety considerations,
tools required, and procedures you should
perform before the actual installation
Provides instructions for installing the PA-FE port
adapters on a VIP2 interface processor installed in
a Cisco 7500 or Cisco 7000 series router
Provides instructions for installing the PA-FE port
adapters in a Cisco 7200 series router
Provides instructions for installing the PA-FE port
adapters in a Cisco uBR7200 series universal
broadband router
Provides instructions for installing the PA-FE port
adapters in the Cisco 7100 series routers
Provides instructions for installing PA-FE port
adapter cables on supported platforms
Provides instructions for configuring PA-FE port
adapter interfaces on supported platforms
Advertisement
Table of Contents
