Related Documentation - Cisco PA-T3 Installation And Configuration Manual

Serial port adapter
Table of Contents

Advertisement

Related Documentation

Section
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Related Documentation
Your router and the Cisco IOS software running on it contain extensive features and functionality,
which are documented in the following resources:
For Cisco IOS software configuration information and support, refer to the modular
configuration and modular command reference publications in the Cisco IOS software
configuration documentation set that corresponds to the software release installed on your
Cisco hardware.
Note
maintenance documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
For hardware installation and maintenance information on Cisco 7000 series and Cisco 7500
series routers, and the VIP2, refer to the following publications:
— The installation and configuration guide that shipped with your Cisco 7000 series or
— Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (for
For hardware installation and maintenance information on the Catalyst 5000 series switches and
the Catalyst RSM/VIP2, refer to the following publications:
— The installation and configuration guide that shipped with your Catalyst 5000 series switches
vi
PA-T3 Serial Port Adapter Installation and Configuration
You can access Cisco IOS software configuration and hardware installation and
Cisco 7500 series router
VIP2 users only)
Title
VIP2 and the PA-T3 Port Adapter
Catalyst RSM/VIP2 and the PA-T3
Port Adapter
Cisco 7200 Series and the
PA-T3 Port Adapter
Cisco uBR7200 Series and the
PA-T3 Port Adapter
Cisco 7100 Series and the PA-T3
Port Adapter
Configuring the PA-T3 Interfaces
Description
Provides instructions for installing
the PA-T3 port adapter on a VIP2
interface processor installed in
Cisco 7500 or Cisco 7000 series
routers.
Provides instructions for installing
the PA-T3 port adapter on a
Catalyst RSM/VIP2 installed in
Catalyst 5000 series switches.
Provides instructions for installing
the PA-T3 port adapter in a Cisco
7200 series router.
Provides instructions for installing
the PA-T3 port adapter in the
Cisco uBR7200 series universal
broadband router.
Provides information on the PA-T3
and its use in Cisco 7100 series
routers.
Provides instructions for configuring
your port adapter on the supported
platforms. The instructions given in
this chapter apply to all supported
platforms described in this document.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa-2t3

Table of Contents