Cisco PA-FE-FX Installation And Configuration Manual page 64

Checking the Configuration
Following is an example of a successful ping command to a remote server with the address
172.16.0.0:
Router# ping 172.16.0.0
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echoes to 10.0.0.0, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/15/64 ms
Router#
If the connection fails, verify that you have the correct IP address for the destination and that the
device is active (powered on), and repeat the ping command.
8-14 PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration