Cisco PA-FE-FX Installation And Configuration Manual page 48

Attaching PA-FE Port Adapter Interface Cables
Figure 7-1
Figure 7-2
Warning
cable is connected, avoid exposure to laser radiation and do not stare into open apertures.
7-2 PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration
Each PA-FE-FX or PA-FE-TX can have either an MII attachment or an RJ-45 (or
Note
SC) attachment, but not both simultaneously. The MII and RJ-45 (or SC) receptacles
represent two physical connection options for one Fast Ethernet interface.
Connecting PA-FE-TX MII or RJ-45 Cables—Horizontal Orientation Shown
Without Handles
FAST ETHERNET
MII cable
or
To transceiver,
repeater, or DTE
Connecting PA-FE-FX MII or SC Cables—Horizontal Orientation Shown
Without Handles)
FAST ETHERNET
MII cable or
Duplex (1)
To repeater
To transceiver,
repeater, or DTE
Because invisible laser radiation may be emitted from the aperture of the port when no
RJ-45 cable
To repeater
or DTE
Simplex (2)
To repeater