Table of Contents
Advertisement
Chapter 3 Setup Menus
Setup Menus for Primary Measurements
1. Press Setup (f3) to access the Main Setup Screen.
2. Use the arrow key to scroll across to the modules to ISE channel you wish to use and
3. Scroll to across to the mode menu and press Select (f3).
Thermo Scientific Orion VERSA STAR pH/ISE/Temperature Module
press Select (f3).
ISE Setup Menu
(Default values are in bold in the table below)
Electrode Serial Number Input
Electrode Type
Sample ID
Significant Digits
Stability
Averaging
Read Type
Measure Unit
Isopotential Value
Linear Regression
Blank Correction
Low Level Stability
Alarm**
** Limit and set point alarm default set to 'off'.
Cal due alarm set to 12 hours.
pH Setup Menu
(Default values are in bold in the table below)
Electrode ID
Sample ID
Resolution
Stability
Averaging
Read Type
Buffer Group
Isopotential Value
Linear Regression
Alarm**
** Limit and set point alarm default set to 'off'.
Cal due alarm set to 12 hours.
See table below
Off, Manual, Auto Increment
1, 2, 3, 4 digits
Smart, Fast, Medium, Slow
Off, Automatic Smart
AutoRead, Timed, Continuous
ppm, Molar, mg/L, %, ppb, None
Off, On
Off, On
Off, On
Off, On
Limit, CalDue, Set Point
Input
Off, Manual, Auto Increment
0.1, 0.01, 0 .001
Smart, Fast, Medium, Slow
Off, Automatic Smart
AutoRead, Timed, Continuous
USA, DIN, Custom
Off, On 7 .000
Off, On
Limit, CalDue, Set Point
5
Advertisement
Table of Contents
