Installation - Haier XQG65-11SU User Manual

Installation

Remove all the packing materials as shown in figure
1 (including the foam base)
Check attachments and materials
Name
Qty
Model
XQG65-11SU
Remove the packing screws as shown in figure 2.
The packing bolts protect the appliance from
impact damage during transportation. Follow the
steps below before using the appliance.
1. Remove the rear panel of the washing
machine;
2. remove the three packing bolts from the rear
panel of the washing machine, the rubber hose
and then the shock absorption steel channel;
3. refit the back plate;
4. fill the holes left by the packing bolts with
plastic plugs.
(Attention: the packing bolts and rubber hose
should be kept in a safe place for later use)
Adjusting the position of the washing machine.
The washing machine is provided with
adjustable feet. Before use, adjust the
feet until the appliance is level, as shown
in figure 3.
4
Quality
Operational
manual
certificate
1 1
Water
Drain
hose
holder
1 1
Fig.1
Plastic
plugs
3
Fig.2
Fig.3