Introduction; Packaging Check List; System Requirements; Bios Setup - ACTiSYS ACT-WF8000U User Manual

2 in 1 wlan / fir combo adapter

Hide thumbs Also See for ACT-WF8000U:

Table of Contents

ACTiSYS

2. INTRODUCTION

ACTiSYS WF8000U is an advanced 2 in 1 USB interface dongle combining 4MbpsFast Infrared

(ACT-IR4000US) and WLAN client that comply with the IRDA Standard and the IEEE 802.11b

Standard. The Fast Infrared support reliable high speed data transmission securely. The IEEE

802.11b Ethernet standard allows you to connect computers and devices at speeds up to 11Mbps,

dependent upon the distance between wireless adapters, the configuration of your working

environment, or the capabilities or limitations of your computer systems.

This adapter gives you the flexibility to connect it to any 802.11b network and IrDA devices.

Fully compliant to USB specification 1.1 and IrDA specification 1.1

Full-speed (12 Mbps) USB device operation

Supports FIR (4Mbps) and all SIR speeds (9.6, 19.2, 38.4, 57.6 and 115.2Kbps).

Bus-powered device. Obtain power from USB port. No external power supply required.

Not occupy PC's COM or Parallel port and has no complicated hardware port and resource

setting and conflict, such as IO address / IRQ / DMA numbers.

True PNP (Plug And Play) device. Without re-installing USB driver when re-plugs in.

128-bit Wired Equivalent Privacy (WEP) data encryption.Dimension / Weight : 95mm (L) X

38mm(W) X 17(H) / 28gm

The package includes

1. ACT-WF8000U USB Dongle

2. USB Cable

3. ACT-IR4000US / WF8000U Adapter Driver and CD for User's manual.

To use ACT-WF8000U, your computer MUST meet the following requirements.

1. Windows 98SE/ME/2000/XP.

2. One unoccupied USB port.

Before you use this device, You MUST enable your computer USB port in BIOS Settings.

Release 1.0a 2004. 4. 10

ACTiSYS Corporation

ACTiSYS ACT-WF8000U User's Manual

4 of 51

Table of Contents