Table of Contents
Advertisement
1 INTRODUCTION
ACT-IR2002UL & ACT-IR4002US are advanced Infrared USB adapters to replace the serial port
peripheral through USB port.
ACT-IR4002US is the thumb size version of ACT-IR2002UL. The latter has build in USB cable while the
former, like a flash disk, has only build in USB connector so that it becomes more compact to be carried.
They are also the next generation of ACT-IR2000UL/ ACT-IR4000US respectively. You will find no any
functional difference between them except the new generation has new driver and more flexible to use.
Features :
Supports all Windows from Win98 up to Win8 (32 & 64 bit), Win CE 4.2 & 5.0 (USB host), Mac 10.x
(both Intel & Power PC based) and Linux.
WHQL certified.
Fully compliant to USB specification 1.1 and IrDA
Full-speed (12 Mbps) USB device operation
Supports FIR (4Mbps), MIR (1.152 Mbps) and all SIR speeds (9.6, 19.2, 38.4, 57.6 and 115.2 kbps).
Bus-powered device. Obtain power from USB port. No external power supply required.
Low power consumption in standby mode (Standby current 20 mA).
Not occupy PC's COM or Parallel port and has no complicated hardware port and resource setting
and conflict, such as IO address / IRQ / DMA numbers.
2 PACKAGING CHECK LIST
The package includes:
A) ACT-IR2002UL
1. ACT-IR2002UL USB Dongle with built in USB
cable.
2. Installation CD for Driver and User's manual.
3 SYSTEM REQUIREMENTS
1. Windows 98SE/ME/2000/XP/Vista/Windows 7/8, Win CE 4.2 & 5.0 (USB host), Mac 10.x (both Intel
& Power PC based) and Linux
2. One unoccupied USB port.
4 BIOS SETUP
Before you use this device, you MUST enable your computer USB port in BIOS Settings.
© Copyright 2002-2014 ACTiSYS Corp.
ACTiSYS Confidential Information
The Infrared Wireless Expert
Page 6 of 30
®
specification 1.4
B) ACT-IR4002US
1. ACT-IR4002US USB Dongle
2. USB Cable
3. Installation CD for Driver and User's manual.
ACT-IR2002UL/ACT-IR4002US
User's Manual
Apr. 7, 2014
V.1.0.6
Hide quick links:
Advertisement
Table of Contents
