Table of Contents
Advertisement
Connecting external equipment
Before connecting any external equipment, disconnect from the main power
is connected.
COMMON INTERFACE
The Common Interface is
for a Conditional Access
Module (CAM). There is
access for two CAMs.
Contact a service provider
The cover must be
removed before inserting
the CAM
☛
TV
IN/OUT
WE RECOMMEND THAT YOU USE SCART LEADS IN
ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a media recorder
it is essential that the aerial cable is connected through
the decoder and/or through the media recorder to the
television.
SCART leads:
Connect the media recorder IN/OUT socket to the
television. Connect the decoder TV socket to the
television. Connect the media recorder SAT socket to the
decoder MEDIA RECORDER socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
decoder*
MEDIA REC.
IN
OUT
IN
OUT
SAT
media recorder
6
SCART 1 (EXT 1)
A wide variety of external equipment can be
connected to the back of the television, therefore
the relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2 for
a media recordcer.
If connecting S-VIDEO equipment, set the INPUT for
EXT2S or EXT3S. See page 25.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button. To
B
recall external equipment, press
DTV, EXT1, EXT2, EXT2S, EXT3, EXT3S or ATV.
SCART 2 (EXT 2)
Digital audio output
to select between
Advertisement
Table of Contents
