Contents SETTING UP Safety precautions – Some do's and don'ts for you to be aware of Installation and important information The remote control – an at-a-glance guide Connecting external equipment – a guide to connecting equipment to the back of the television Side Connections and controls –...
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
To call up text services in analogue mode Selectable picture mode and interactive services in digital mode Picture format When in TV mode: Still picture in digital mode When using a TOSHIBA VCR or DVD: Stereo/bilingual transmissions I/II press to PAUSE/STEP Digital Subtitles...
Connecting external equipment Before connecting any external equipment, disconnect from the main power is connected. COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). There is access for two CAMs. Contact a service provider The cover must be removed before inserting the CAM ☛...
Page 7
Connections and controls A wide variety of external equipment can be connected via the sockets located on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the side of the television may be used for some functions. INPUT 3 (EXT 3) MENU...
Digital tuning, programme sorting Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed on page 5.
Digital programme sorting continued auto tuning, manual tuning With the list of stations now showing use The television will start to search for all available Q or P to highlight the station you want to stations. move and press R . You must allow the television to complete The selected station will be moved to the right of the search.
Analogue tuning and programme sorting, manual tuning The television can be tuned to all available analogue stations. Pressing six times will put the television into analogue mode. To return to digital viewing press , DTV will appear on the screen. NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on.
Analogue manual tuning continued fine tuning The television can be tuned-in manually using INSTALLATION. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Using Q select PROGRAMME then press R and The television will also search by frequency.
Analogue autostore You must allow the television to complete Autostore the search. When the search is complete the television will When the AUTOSTORE feature is selected all analogue automatically select programme position 1. This channels and settings will be lost, the television will return may not be a clear picture or the signal may be to factory settings and then re-tune.
General controls, time display, stereo/bilingual transmissions, child lock Selecting programme positions Child lock CHILD LOCK disables the buttons on the side of the To select a programme position use the numbered television. All buttons on the remote control can still be used. buttons on the remote control.
Sound controls – volume, sound mute, balance, AVL, pseudo All sound controls are available in both digital and analogue modes. To access the SOUND menu in digital: press MENU and using select TV setup, press OK to bring up the SOUND option, press select.
Sound controls – continued equalizer, headphone All sound controls are available in both digital and analogue modes. To access the SOUND menu in digital: press MENU and using select TV setup, press OK to bring up the SOUND option, press select.
Picture format Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the button repeatedly to select between Auto, 4:3, Wide, Cinema, Subtitle and Super Live. When Auto is selected the format being displayed is determined by the picture being broadcast. Use this setting to view a true 4:3 broadcast.
Picture controls – picture mode, tilt, colour temperature The picture controls are available in both digital and analogue modes. To access the PICTURE menu in digital: press MENU and using select TV setup, press OK to bring up the PICTURE option, press select.
Picture controls – VNR, picture format, continued VCR mode, blue background The picture controls are available in both digital and analogue modes. To access the PICTURE menu in digital: press MENU and using select TV setup, press OK to bring up the PICTURE option, press select.
ENTER When all the details have been entered press OK to save the timer. Auto-start VCR: If your Toshiba media recorder is AV link compatible setting this feature to YES will auto start/stop the recording at the correct time. MENU...
Digital Programme Guide and on-screen information When viewing in digital mode the on-screen information and guide give access to programme details for all available channels. Recording can also be set from both the information screen and guide. Information Guide Select information by pressing , the Select the on-screen guide by pressing GUIDE , the information screen will appear giving details of the...
Digital parental controls – setting the pin, mode There are a number of parental controls which can block specific channels being viewed, and which can only be accessed with a security PIN code when in digital mode. Once you've entered the PIN code once, you do not need to enter it again until next time you power-on TV. To restore PIN code entry again (e.g.
Digital settings – favourite programmes, locked programmes, encrypted programmes Selecting favourite programmes Locking programmes Favourite Programmes creates a list of the digital Locked Programmes stops the viewing of digital channels that are watched most. Four lists can be created, channels, they can only be accessed by entering the PIN. these can be a mixture of television, text and radio channels.
Digital settings – audio languages, continued subtitles, reset tv, common interface Audio languages Reset TV This feature allows a programme or film to be viewed with Selecting Reset TV will delete all stored digital channels a choice of soundtrack language, provided they are and settings.
Digital settings – software upgrade continued Searching for new software Version If preferred, software upgrades can be searched for This feature can be used to check the version of software manually using Search for New Software. currently installed. In the SOFTWARE UPGRADE menu press P or From the FEATURE MENU press P or Q to Q to select Search for New Software.
Input selection and AV connections, Analogue switch-off Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations. Most media recorders and decoders send a signal Use R to change the EXT2 OUTPUT option to: through the SCART lead to switch the television to the correct Input socket.
Page 26
Four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control. For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer.
Analogue text continued – control buttons Below is a guide to the functions of the remote control analogue text buttons. To select a page whilst viewing a To display an initial page: normal page: Press to access an initial page. The one displayed is Enter the page number then press , a normal dependant on the broadcaster.
Below are the answers to some of the most common queries. For more information go to www.toshiba.co.uk Why don't the controls on the side of the Why is there no sound or picture? television work? Check the mains switch is on and check all Check that CHILD LOCK is not selected.
Page 29
uestions nswers continued What can be done if the PIN number has been Why are there problems with analogue text? forgotten? Use the Master PIN code of 1276, then change to Good performance of text depends on a good a number of your choice. Ensure that no-one else strong broadcast signal.