Table of Contents
Advertisement
Digital settings
subtitles, reset tv, common interface
Audio languages
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided they are
currently being broadcast.
From the SETUP MENU press Q to select
1
Languages.
SETUP MENU
TV Setup
Languages
Auto tuning
Manual tuning
Programmes
Watch TV
MENU
Watch TV
Press OK, then press P or Q to highlight Audio
2
Language.
Use S or R to select ENGLISH, WELSH or
3
GAELIC.
LANGUAGES
Audio Language
Subtitles
MENU
Back
EXIT
Watch TV
NOTE: If more than one soundtrack is available,
O
use
I/II
to select between them.
Subtitles
This feature will show subtitles on the bottom of the
screen in the selected language provided they are being
broadcast.
From the LANGUAGES menu press Q to select
1
Subtitles.
Use S or R to select OFF, ENGLISH, WELSH or
2
GAELIC.
– audio languages,
continued
Selecting Reset TV will delete all stored digital channels
1
2
ENTER
ENTER
ENTER
ENTER
ENTER
The Common Interface Slot, situated on the back of the
1
2
ENGLISH
OFF
3
23
Reset TV
and settings. The television will return to factory settings
and then auto tune.
Press MENU and then press Q until Reset TV is
highlighted.
Press OK to select. A screen will appear warning
that all digital settings will be lost, press OK to
continue.
The Welcome screen will appear, press OK to
continue, the television will then auto tune.
Common interface
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional broadcasts to be
viewed. For information see a service provider.
Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM is loaded.
From the FEATURE MENU press P or Q to
select Common Interface Slots.
FEATURE MENU
Parental Control
Favourite and Locked Programmes
Favourites
Common Interface Slots
Software Upgrade
MENU
Back
EXIT
Watch TV
Details of the CAM should now be available. Use
OK to select it. If two CAMs are inserted use
S or R to select between the two.
ENTER
ENTER
ALL
NO MODULE
ENTER
Advertisement
Table of Contents
