General Controls - Selecting Programme Positions, Time Display; Stereo And Bilingual Transmissions - Stereo/Mono Or Dual Language Broadcasts; Child Lock - Disabling The Buttons On The Television - Toshiba 32YT56 Series Owner's Manual

General controls, time display,
stereo/bilingual transmissions, child lock
Selecting programme positions
To select a programme position use the numbered
buttons on the remote control.
Programme positions can also be selected using P
e
P .
To display on-screen information i.e. programme position,
input mode or stereo/mono signal press
again to clear.
To revert to the previous programme position press
REMEMBER: To move between digital and analogue
B
modes, press till DTV appears on the screen for
B
digital, press repeatedly to select analogue.
The Time Display – analogue only
The time display facility allows the current (text service)
time to be seen on the television screen.
8 9
Press / whilst watching a normal television
broadcast to see a time display from the broadcaster.
Press again to clear it from the screen.
Stereo and Bilingual transmissions
In analogue mode:
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear
O
Stereo... Press I/II to select Stereo or Mono.
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
O
appears press I/II to select Dual 1, Dual 2 or Mono.
In digital mode:
I/II appears during channel change and the
current programme has more than one audio track.
O
Press I/II to select between audio languages.
f
and
. Press
^
.
.
bar if the
13
Child lock
CHILD LOCK disables the buttons on the side of the
television. All buttons on the remote control can still be used.
This feature is available in digital and analogue modes.
1 If in digital mode, press MENU, using
Setup from the SETUP MENU, then press OK.
SETUP MENU
TV Setup
Languages
Auto tuning
Manual tuning
Programmes
Watch TV MENU Watch TV
A menu will appear on screen with SOUND,
2
PICTURE and FEATURE options. Using
the FEATURE menu and press R .
If in analogue mode, press MENU and using
3
select the FEATURE menu and press R .
MENU
SOUND
PICTURE
FEATURE
INSTALLATION
PROGRAMME
Press Q to choose CHILD LOCK and press R to
4
select, a tick will appear in the box. Press OK.
FEATURE
SLEEP TIMER
CHILD LOCK
TXT LANGUAGE
LANGUAGE
EXT-2 OUTPUT
BLUE BACKGRND
When CHILD LOCK is selected, a reminder will
appear when any of the side panel buttons are
pressed. Once the television has been switched
off it can ONLY be brought out of standby using
the remote control.
Q select TV
ENTER
ENTER
ENTER
ENTER
ENTER
Q select
Q
x
x
x
x
x
OFF
ENGLISH
ENGLISH
TV