Table of Contents
Advertisement
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
HDMI INPUT
SOCKETS
SCART 2 (EXT2)
SCART 1 (EXT1)
Decoder*
Media Recorder
Aerial cables:
Connect the aerial to the socket on the rear of the television. If
you use a decoder* and/or a media recorder it is essential that
the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect the
media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
In addition there is a fixed external audio ouput which enables
the connection of a suitable Hi-Fi unit.
The Digital Audio Output socket enables the connection of a
suitable surround sound system. NOTE: this output is always
active.
HDMI (High-Definition Multimedia Interface) is for use with a
DVD, decoder or electrical equipment with digital audio and
video output.
REGZA-LINK will only work through HDMI when using other
Toshiba equipment with REGZA-LINK capability.
DIGITAL AUDIO OUTPUT (DTV MODE ONLY)
COMPONENT VIDEO (EXT3)
MEDIA REC.
TV
IN/OUT
SAT
NOTE: It is recommended that an HDMI cable with the HDMI
logo (
this television if the connection is capable of 1080p and/or
supports Deep Color™ a Category 2 cable will be required.
Conventional HDMI/DVI cable may not work properly with this
mode. It is recommended that DVI cable or DVI/HDMI adapter
with cable is less than 2m long.
PLEASE NOTE: Although this television is able to connect to
HDMI equipment it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be connected
to the back of the television, therefore the relevant
owners manuals for all additional equipment must be
referred to.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder. If connecting S-VIDEO equipment, set the
INPUT for EXT2. See page 39.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment, press
B
to select between DTV, EXT1, EXT2, EXT3C, HDMI1,
HDMI2, HDMI3, PC or ATV.
7
FIXING STRAP
) is used. When connecting other equipment to
HDMI, the HDMI logo, High-Definition Multimedia Interface and
Deep Color are trademarks or registered trademarks of HDMI
Licensing, LLC.
POWER SWITCH
(Full Power Down
Option – see page 12)
CABLE HOLDER
Advertisement
Table of Contents
