Digital Settings - Audio Languages, Audio Output, Subtitles, Reset Tv, Common Interface; Audio Output - Toshiba WLT68 Owner's Manual

Digital settings
audio output, subtitles, reset tv,
Audio languages
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided they are
currently being broadcast.
In the SETUP MENU press Q to select
1
Languages.
Press OK, then press P or Q to highlight Audio
2
Language.
LANGUAGES
Audio Language

Audio output

Subtitles
MENU Back EXIT
Use S or R to select ENGLISH, WELSH or
3
GAELIC.
NOTE: If more than one soundtrack is available,
use to select between them.
I/II
O
Audio output
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format
[S/PDIF]), the following options can be selected.
PCM: this mode outputs PCM format to the digital
audio output socket.
BITSTREAM: this mode outputs audio format (eg. Dolby
Digital) to the digital audio output socket providing it is
being broadcast. It will automatically mute the speakers.
In the LANGUAGES menu press Q to select
1
Audio output.
Use S or R to select PCM or Bitstream.
2
continued
common interface
ENGLISH
PCM
OFF
Watch TV
– audio languages,
This feature will show subtitles on the bottom of the
screen in the selected language provided they are being
In the LANGUAGES menu press Q to select
1
Subtitles.
Use S or R to select OFF, ENGLISH, WELSH or
2
GAELIC.
Selecting Reset TV will delete all stored digital channels
and settings. The television will return to factory settings
In the SETUP MENU press Q until Reset TV is
1
highlighted.
Press OK to select. A screen will appear warning
2
that all digital settings will be lost, press OK to
continue.
The Welcome screen will appear, press OK to
continue, the television will then auto tune.
Common interface
The Common Interface Slot, situated on the back of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information see a
Insert the CAM and card into the Common
1
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM is loaded.
In the FEATURE MENU press P or Q to select
2
Common Interface Slots.
Details of the CAM should now be available. Use
3
OK to select it. If two CAMs are inserted use
S or R to select between the two.
29
Subtitles
broadcast.
Reset TV
and then auto tune.
service provider.