Dtv Settings - Subtitles, Audio Languages, Audio Output, Common Interface - Toshiba REGZA AV55 Digital Series User Manual

DTV settings – subtitles, audio languages,
Subtitles
When in digital mode this feature will show subtitles on the
bottom of the screen in the selected language provided
they are being broadcast.
From the SETUP menu press Q to select DTV
1
Settings.
Press OK, then press P and Q to highlight
2
Subtitle.
Press Q to select Subtitle and use S and R to
3
select On or Off.
Subtitle
Subtitle
Subtitle Type
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Press Q to select Subtitle Type and use S or R
4
to select Normal or For Hard of Hearing.
Press Q to select Primary Subtitle Language
5
or Secondary Subtitle Language and use
S and R to select an option.
The SUBTITLE button can also be used to select
On or Off, and to select subtitle language if more
than one subtitle is available.
common interface
Off
Normal
English
English
English
English
29
Audio Languages
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided they are
currently being broadcast.
In the Subtitle menu press Q to select Primary
1
Audio Language or Secondary Audio
Language and use S or R to select an option.
Subtitle
Subtitle
Subtitle Type
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
NOTE: If more than one soundtrack is available,
I/II
use to select between them.
O
Common Interface
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information contact a
service provider.
Insert the CAM and card into the Common
1
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM is loaded.
In the DTV Settings menu press P or Q to
2
select Common Interface and press OK.
Details of the CAM should now be available.
3
Off
Normal
English
English
English
English