Removal Of The Cpu-181 Board - Sony SX-M700 Service Manual

2-3-2. Removal of the CPU-181 Board

SX-M700/M100
Procedure
1. Remove the top panel. (Refer to section, "2-1.
REMOVAL OF THE EXTERNAL PANELS".)
2. Disconnect the three connectors (CN3, CN4, CN5)
from the CPU-181 board.
3. Remove the five screws (PSW 3x8), then remove the
CPU-181 board.
Connector CN4
(from SW-710 board)
2-8(E)
Connector CN5
(from AA-93 board)
Screws (3 pcs)
PSW 3x8
Connector CN3
(from PS-364 board)
Screws (2 pcs)
PSW 3x8
CPU-181 board
SX-M700