Sony SX-M700 Service Manual page 31

2 Removal of the Front Panel Assembly
1. Remove the five volume control knobs.
2. Remove the two screws "b" (BVTP 3x8)
from the left and right side panels,
then remove the front panel assembly
in the direction of arrow B.
Volume
control
knobs
Screw "a" (5 pcs)
B 3x6
TYPE 2
PS-364 board
Screw "b"
(2 pcs)
BVTP 3x8
TYPE2
B
1 Removal of the Top Panel
1. Remove the ten fixing screws "a" (B 3x6 TYPE 2).
2. Remove the top panel in the direction of arrow A.
A
PS-363 board
AC inlet
Board holder
C
Connector CN116
(from AA-93 board) CN-1478 board
Connector
CN115
(from AA-93 board)
Screw "b" (2 pcs)
BVTP 3x8
TYPE 2
Screw "a" (5 pcs)
B 3x6
TYPE 2
Screw "e" (2 pcs)
BVTP 3x8
TYPE 2
Screw "d" (2 pcs)
B 3x6
Screw "c" (3 pcs)
B 2.6x6
Screw "e" (2 pcs)
BVTP 3x8
TYPE 2
AA-79 board
3 Removal of the Rear Panel Assembly
1. Remove the top panel.
2. Remove the three screws "c" (B 2.6x6) near the connectors.
3. Remove the two fixing screws "d" (B 3x6) scuring
the AC inlet.
4. While grasping the board holder with small pliers, remove
the PS-363 board.
5. Disconnect the two connectors (CN115, CN116) from
the AA-79 board.
6. Remove the four fixing screws "e" (BVTP 3x8), the remove
the rear panel assembly in the direction of arrow C.